# Parameters file for Surveillance Bot
datapath: "/data/SDS/" # SC3 Datapath
networks: ["1Y", "HA", "MK"] # select networks, list or str
stations: "*" # select stations, list or str
locations: "*" # select locations, list or str
stations_blacklist: ["TEST", "EREA", "DOMV"] # exclude these stations
networks_blacklist: [] # exclude these networks
interval: 60 # Perform checks every x seconds
n_track: 360 # wait n_track * intervals before performing an action (i.e. send mail/end highlight status)
timespan: 3 # Check data of the recent x days
verbosity: 0 # verbosity flag
track_changes: True # tracks all changes since GUI startup by text highlighting (GUI only)
warn_count: False # show number of warnings and errors in table
min_sample: 5 # minimum samples for raising Warn/FAIL
dt_thresh: [300, 1800] # threshold (s) for timing delay colourisation (yellow/red)
html_figures: True # Create html figure directory and links
reread_parameters: True # reread parameters file (change parameters on runtime, not for itself/GUI refresh/datapath)
POWBOX:
pb_ok: 1 # Voltage for PowBox OK
pb_SOH2: # PowBox channel 2 voltage translations
-1: {"230V": "PBox under 1V", "12V": "PBox under 1V"}
1: {"230V": "OK", "12V": "OK"}
2: {"230V": "OFF", "12V": "OK"}
3: {"230V": "OK", "12V": "overvoltage"}
4: {"230V": "OK", "12V": "undervoltage"}
4.5: {"230V": "OFF", "12V": "overvoltage"}
5: {"230V": "OFF", "12V": "undervoltage"}
pb_SOH3: # PowBox channel 3 voltage translations
-1: {"router": "PBox under 1V", "charger": "PBox under 1V"}
1: {"router": "OK", "charger": "OK"}
2: {"router": "OK", "charger": "0 < resets < 3"}
2.5: {"router": "OK", "charger": "locked"}
3: {"router": "FAIL", "charger": "OK"}
4: {"router": "FAIL", "charger": "0 < resets < 3"}
5: {"router": "FAIL", "charger": "locked"}
# Thresholds for program warnings/voltage classifications
THRESHOLDS:
pb_thresh: 0.2 # Threshold for PowBox Voltage check +/- (V)
max_temp: 50 # max temperature for temperature warning
low_volt: 12 # min voltage for low voltage warning
high_volt: 14.8 # max voltage for over voltage warning
unclassified: 5 # min voltage samples not classified for warning
max_vm_warn: 1.5 # threshold for mass offset (warn), fail)
max_vm_fail: 2.5 # threshold for mass offset (warn), fail)
clockquality_warn: 90 # warn level - clock quality ranges from 0 % to 100 % with 100 % being the best level
clockquality_fail: 70 # fail level
min_gap: 0.1 # minimum for gap declaration, should be > 0 [s]
# ---------------------------------- Specification of input channels ---------------------------------------------------
# Currently supported: EX[1-3], VEI, VM[1-3], LCQ
#
# For each channel a factor 'unit' for unit conversion (e.g. to SI) can be provided, as well as a 'name'
# and 'ticks' [ymin, ymax, ystep] for plotting.
# 'warn' and 'fail' plot horizontal lines in corresponding colors (can be str in TRESHOLDS, int/float or iterable)
#
# 'transform' can be provided for plotting to perform arithmetic operations in given order, e.g.:
# transform: - ["*", 20]
# - ["-", 20]
# --> PBox EX1 V to deg C: 20 * x -20
CHANNELS:
EX1:
unit: 1e-6
name: "PowBox Temperature (°C)"
ticks: [-10, 50, 10]
transform:
- ["*", 20]
- ["-", 20]
warn: "max_temp"
EX2:
unit: 1e-6
name: "PowBox 230V/12V (V)"
ticks: [0, 5, 1]
warn: [2, 3, 4, 4.5, 5]
EX3:
unit: 1e-6
name: "PowBox Router/Charger (V)"
ticks: [0, 5, 1]
warn: [2, 2.5, 3, 4, 5]
VEI:
unit: 1e-3
name: "Datalogger (V)"
ticks: [9, 15, 1]
warn: ["low_volt", "high_volt"]
fail: 10.5
VM1:
unit: 1e-6
name: "Mass position W (V)"
ticks: [-2.5, 2.5, 1]
warn: [-1.5, 1.5]
fail: [-2.5, 2.5]
VM2:
unit: 1e-6
name: "Mass position V (V)"
ticks: [-2.5, 2.5, 1]
warn: [-1.5, 1.5]
fail: [-2.5, 2.5]
VM3:
unit: 1e-6
name: "Mass position U (V)"
ticks: [-2.5, 2.5, 1]
warn: [-1.5, 1.5]
fail: [-2.5, 2.5]
LCQ:
name: "Clock quality (%)"
ticks: [0, 100, 20]
warn: "clockquality_warn"
fail: "clockquality_fail"
# specify data channels (can be additional to the above). From these channels only headers will be read
data_channels: ["HHZ", "HHN", "HHE"]
# ---------------------------------------- OPTIONAL PARAMETERS ---------------------------------------------------------
# add links to html table with specified key as column and value as relative link, interpretable string parameters:
# nw (e.g. 1Y), st (e.g. GR01A), nwst_id (e.g. 1Y.GR01A)
add_links:
# for example: slmon: {"URL": "path/{nw}_{st}.html", "text": "link"}
slmon: {"URL": "../slmon/{nw}_{st}.html", "text": "show"}
24h-plot: {"URL": "../scheli/{nw}/{st}.png", "text": "plot"}
# add station-independent links below html table (list items separated with -)
add_global_links:
# for example: - {"text": "our homepage", "URL": "https://www.rub.de"}
- {"text": "show recent events on map",
"URL": "https://fdsnws.geophysik.ruhr-uni-bochum.de/map/?lat=39.5&lon=21&zoom=7&baselayer=mapnik"}
# html logo at page bottom (path relative to html directory)
html_logo: "figures/Logo_RUB_BLAU_rgb.png"
# E-mail notifications
EMAIL:
mailserver: "localhost"
addresses: ["marcel.paffrath@rub.de", "kasper.fischer@rub.de"] # list of mail addresses for info mails
sender: "webmaster@geophysik.ruhr-uni-bochum.de" # mail sender
stations_blacklist: ['GR33'] # do not send emails for specific stations
networks_blacklist: [] # do not send emails for specific network
# specify recipients for single stations in a yaml: key = email-address, val = station list (e.g. [1Y.GR01, 1Y.GR02])
external_mail_list: "mailing_list.yaml"